Back

Case Studies

Specialty Steel Curtainwall Framing Sets Stage at High School Auditorium

Lecture halls often conjure up images of teachers, scribbling pens and ticking wall clocks – not students in dance shoes, theater costumes or choir robes. But at Trumbull High School, Trumbull, Connecticut, the latter might be more appropriate.

Case Study

Company:

School

Location:

Trumbull, Connecticut, USA

Objective:

Upgrade and transform the Trumbull High School lecture hall into a full-fledged performance center suitable for use by both the school and the entire town.

Solution:

Install SteelBuilt SG Curtainwall System from Technical Glass Products. The steel-based curtainwall framing system is typically three times stronger than aluminum assemblies of the same profile dimension, allowing for reduced frame dimensions and greater free spans of glazing, both of which are necessary for increasing daylight and views.

Results:

“The curtainwall system was our vehicle for connecting performers to the outside world, and the outside world to the performers,” says Greg Smolley, principal of JCJ Architecture. “With SteelBuilt SG Curtainwall, viewers from outside the building can actually see straight through the stacked curtainwalls, over the chairs and down into the performance center.”

Lecture halls often conjure up images of teachers, scribbling pens and ticking wall clocks – not students in dance shoes, theater costumes or choir robes. But at Trumbull High School, Trumbull, Connecticut, the latter might be more appropriate.

Built in 1971, the school’s lecture hall quickly became the main auditorium and host to drama and dance productions, music events and assemblies. Nearly four decades later, however, the school’s Board of Education found that time and excessive use had taken their toll on the performance center, leaving it far from show worthy. Broken seats, overused lights and a host of age-related problems plagued the once modern space.

In 2008, the board put renovation plans into action. They commissioned JCJ Architecture, a renowned firm with a branch in nearby Hartford, to not only upgrade, but also transform the lecture hall into a full-fledged performance center suitable for use by the entire town.

To be successful at integrating students with the greater public, the new design would need to center on what Greg Smolley, principal of JCJ Architecture, calls “a sense of shared openness.” For inspiration, the firm looked at public school auditoria from pre-war schools. These airy, naturally lit designs led to the architects’ desire for a natural light source – a portal that would let in daylight and allow people to look into and out of the space.

The firm opted for a glazed curtainwall system that would form the building’s exterior, spanning the length of the auditorium and reaching towards the sky. Large spans of glass would allow natural light to enter the hallway in front of the auditorium, pass through a second layer of curtainwall, and subtly illuminate the performing area. The opening would also allow performers to draw inspiration from nature, and allow outsiders to watch dancers and performers practice on a regular basis.

With the basic design in place, the challenge for JCJ Architecture was to find the right curtainwall framing system – one with thin profiles, a smooth glass-to-frame surface and the ability to support oversized glazed lites. As a renovation, the system would also need to blend with the auditorium’s neighboring buildings.

The firm chose SteelBuilt SG Curtainwall System from Technical Glass Products, Snoqualmie, Washington. The steel-based curtainwall framing system is typically three times stronger than aluminum assemblies of the same profile dimension, allowing for reduced frame dimensions and greater free spans of glazing, both of which are necessary for increasing daylight and views.

Silicone sealant is used to seal the building from the elements and transfer wind loads to the supporting steel curtainwall. The aesthetic result is the appearance of smooth and uninterrupted glazed lites, which provide clear lines of sight into and out of the auditorium.

“The curtainwall system was our vehicle for connecting performers to the outside world, and the outside world to the performers,” says Smolley. “With SteelBuilt SG Curtainwall, viewers from outside the building can actually see straight through the stacked curtainwalls, over the chairs and down into the performance center.”

In appearance, the curtainwall system is sophisticated and modern. It forms a straight, unadorned rectangle of glass that does not overwhelm, but rather gracefully complements the red brick of the surrounding building. The slender steel frames are subtle behind the glass, their form a delicate outline to the auditorium inside.

“Aesthetics were a main consideration,” adds Smolley. “We wanted a sleek framing system that would blend in with the surface of the glass. With the SteelBuilt system, you can look all the way down the surface of the application without the framing bumping out. That’s important. It really takes viewers’ attention off the framing and allows them to focus on the glass and what’s behind it. ”

For more information on SteelBuilt SG Curtainwall and the SteelBuilt family of products, along with TGP’s other architectural glass and framing, visit www.tgpamerica.com.

To learn more about the work of JCJ Architecture, visit www.jcj.com.